VairavimoEgzaminai.lt
Rules / Annex 4

Vehicle identification and information signs

English translation for reference. Ministry text of 1 January 2026, with the suspension of 12 November 2026 marked.

Source page 93

Vehicle identification and information signs · source page 93
Read the text of this page

Annex 4
to the Road Rules
VEHICLE IDENTIFICATION AND INFORMATION SIGNS IN VEHICLES
1. It is prohibited to cover vehicle registration plates with protective materials, to bend
them or otherwise change their shape, they must not be damaged, dirty or rusty. A plate with
the vehicle registration number, issued by the joint stock company REGITRA, must be affixed
in a well visible place at the rear of the motor vehicle and/or trailer, when the cycle(s) is (are)
transported attached to the rear of the motor vehicle or trailer and it/they cover(s) the vehicle
registration plate.
2. The end of the motor vehicle registered in the Republic of Lithuania and leaving for
other countries and the end of its trailer must be marked with the distinguishing sign of the
Republic of Lithuania if there is no abbreviation ‘LT’ on the vehicle registration number license
plate. It is a white elliptical sign with black letters 'LT' in the middle. The horizontal axis of the
sign must be at least 175 mm long, the vertical axis at least 115 mm long, the letters must be at
least 80 mm high and at least 10 mm thick.
3. The vehicle brought to the Republic of Lithuania from another state must be marked
with the distinguishing sign of the state in which it is registered, if this sign is not present on
the vehicle registration plate. The distinguishing signs of the vehicles registered abroad, which
are brought to the Republic of Lithuania, are established by international agreements.
4. It is prohibited to operate a vehicle registered in the Republic of Lithuania with the
distinguishing sign of another state.
5. The distinguishing sign depicting a white equilateral triangle with a red rim and a tire
stud symbol in the middle must be affixed to the rear of the car with studded tires. The length
of the side of the triangle is between 200 and 300 mm, the rim width is 1/10 of the side length.
6. The front and rear of the bus carrying groups of children must be marked with square
distinguishing signs with a reflective yellow background and a red rim, and with a black symbol
of the traffic sign ‘Children’. The length of the side of the square – 400 mm, the width of the
rim – 40 mm. A smaller distinguishing sign (the length of the side of the square - 300 mm, the
width of the rim – 30 mm) can be used at the front of the bus.

Source page 94

Vehicle identification and information signs · source page 94
Read the text of this page

7. The front and rear of the school bus must be marked with square distinguishing signs
with a reflective yellow background and a red rim, and with a black symbol of the traffic sign
‘Children’. The length of the side of the square – 300 mm, the width of the rim – 30 mm. There
must be an inscription ‘SCHOOL’ on both sides of the bus: the height of the letters - at least
200 mm. The school bus is marked with the linear marking of a 50 mm wide reflective stripe,
which highlights the dimensions of the bus: a white stripe - at the front, a yellow stripe - on
both sides, a red stripe - at the rear. Additional flashing warning orange lights must be installed
on the roof of the vehicle at four corners. These lights are only turned on during the
boarding/dropping out the students and they flash alternately on the left and right sides of the
vehicle.
8. The front and rear of the vehicles driven by people with hearing disabilities can be
marked with a circular distinguishing sign of 160 mm in diameter with three black circles of 40
mm in diameter, which are arranged at the corners of an imaginary equilateral triangle pointed
downwards.
Amendments to the Paragraph:
No 1135, 04/11/2015, published in the RLA on 05/11/2015, ID code 2015-17682
No 744, 15/09/2021, published in the RLA on 20/09/2021, ID code 2021-19691
9. Vehicles driven by persons with disabilities entitled to use the distinctive sign
‘Persons with disabilities’, or by persons transporting them, may be marked at the front and rear
with square blue ‘Persons with disabilities’ distinctive signs with a white border and a white
‘Persons with disabilities’ traffic sign symbol. The length of the square side is 100 mm and the
width of the border is 10 mm. Persons entitled to use the distinctive sign ‘Persons with
disabilities’ shall be in possession of document(s) proving it.
Amendments to the Paragraph:
No 744, 15/09/2021, published in the RLA on 20/09/2021, ID code 2021-19691
No 982, 20/12/2023, published in the RLA on 21/12/2023, ID code 2023-24836
10. Motor vehicles and combinations of motor vehicles and their trailers used for driving
instruction shall be marked at the front and rear with a white equilateral triangular distinctive
sign with a red border and the letter ‘M’ in black in the middle. The length of the side of the
triangle shall be between 200 mm and 300 mm and the width of the border shall be 1/10 of the
length of the side.
Amendments to the Paragraph:
No 273, 19/04/2023, published in the RLA on 20/04/2023, ID code 2023-07672

Source page 95

Vehicle identification and information signs · source page 95
Read the text of this page

11. Motor vehicles and their combinations with trailers, the dimensions of which (with
or without load) are larger than those established by the Ministry of Transport and
Communications of the Republic of Lithuania, as well as motor vehicles, the maximum speed
of which according to their technical characteristics is lower than the maximum speed allowed
for these vehicles in the Rules, may be equipped with a distinctive speed limitation sign on the
rear left-hand side, i.e. the coloured sign ‘Limited speed’, indicating the speed at which the
vehicle may be operated. The diameter of the sign shall be 160-250 mm and the width of the
border shall be 1/10 of the diameter of the sign.
Amendments to the Paragraph:
No 273, 19/04/2023, published in the RLA on 20/04/2023, ID code 2023-07672
12. At the front or rear, the farthest points of the load, which protrude beyond the
dimensions of the vehicle by more than 1 m or which protrude at least slightly to the side, or
the edge points of vehicles that are wider than 2.6 m must be marked with distinguishing signs
– squares with the sides that are 400 mm long, with light-reflecting diagonal white and red 50
mm wide stripes, which are arranged alternately. These signs must be affixed to the vehicle at
a height of not less than 0.4 m and not more than 1.6 m above the ground. During the dark hours
of the day or in poor visibility conditions, lights must be switched on in the specified places of
the vehicle: white lights at the front, orange lights on the sides and red lights at the rear.
13. Vehicles carrying dangerous goods must be marked and labelled in accordance with
the procedure established in the European Agreement concerning the International Carriage of
Dangerous Goods by Road (the ‘ADR‘) and in its Technical Annexes A and B.
14. Long and heavy goods vehicles, buses and trailers, which are referred to in
Regulation No 70 of the United Nations Economic Commission for Europe, must be marked
with certified distinguishing signs for long and heavy vehicles, in accordance with the
requirements of this Regulation (dimensions, number, arrangement, etc. of the distinguishing
signs).
Amendments to the Paragraph:
No 744, 15/09/2021, published in the RLA on 20/09/2021, ID code 2021-19691

Source page 96

Vehicle identification and information signs · source page 96
Read the text of this page

15. Ceased to apply from 01/01/2022
Withdrawal of the Point:
No 744, 15/09/2021, published in the RLA on 20/09/2021, ID code 2021-19691
Amendments to the Paragraph:
No 1135, 04/11/2015, published in the RLA on 05/11/2015, ID code 2015-17682
16. Motor vehicles, except for mopeds and motorcycles without a trailer, must have an
emergency stop sign - an equilateral triangle, with 450 to 500 mm long sides that are made of
a 50 mm wide reflective material.
17. On buses equipped with safety belts, an information sign ‘Wear your seat belt’ shall
be displayed in front of each seat or on the seat or near the seat in a visible place. The sign shall
be blue and white in colour, have a circle diameter of 60 mm and a white border width of 3 mm.
Amendments to the Paragraph:
No 273, 19/04/2023, published in the RLA on 20/04/2023, ID code 2023-07672
18. Novice drivers must have, at the rear of the car on the left side, a white distinguishing
sign, that is square in shape, with a green rim and a green maple leave in the middle. The length
of the side of the square is from 100 mm to 150 mm, the width of the rim - 1/10 of the length
of the side.
––––––––––––––––––––

Open full-size image